DSE 9470 MKII
24 Volt, 10 Amp Intelligent Battery Charger
DSEPower® · 24 Volt Chargers
Hardware
The DSE9470 MKII is an intelligent 12/24 volt, 10 amp switched-mode battery charger that has fully programmable charging curves, making it suitable for multiple different battery chemistry types. The battery charger is programmed using the DSE Configuration Suite PC Software and is mounted direct to a chassis or onto DIN rail for ease of integration and installation. There are also three integrated LEDs mounted to the battery charger to indicate current charging status and fault conditions.
Product Highlights
- UL Recognized.
- Fully configurable charge voltages and current limit provide compatibility with a wide range of different battery chemistries
- Fully configurable two, three or four stage charge profiles
- Automatic and/or manual boost and storage charge functions
- Configurable temperature compensation of the charge voltage to optimise charge efficiency and battery condition
- Digital microprocessor and switch mode power supply technology to provide high operating efficiency with low charge output ripple and superior line regulation.
- Periodic automatic battery detection test with configurable timers
- Designed to be permanently connected to the battery and AC supply. There is no need to disconnect during high load conditions such as when the engine is cranking or running
- Status and fault indication via three multi-colour LEDs.
- PC configuration using the DSE Configuration Suite configuration software
- Ability to connect to a DSEGenset module as an expansion module, or integrated DSENet® / RS485 port providing Modbus RTU support
- PSU mode allowing the charger to be used as a power supply
- Deep sleep mode allowing the charger to enter a low power consumption state
- Soft start reduces inrush current when charging is initiated
- PIN protection
DSE9470 MKII uygulamanız için mühendis desteği
You can get support from our engineering team for the installation of DSE9470 MKII, its configuration with the DSE Configuration Suite, its integration into your existing systems and on-site commissioning. Contact us for application-specific solutions and technical questions.