Product Highlights

0-10 V and 4-20 mA oil pressure senders support.
Large backlit LCD screen with icons.
Heated display option.
3 phase generator sensing.
3 phase generator and mains sensing.
Breaker control buttons on the front panel.
Generator and load power monitoring (kW, kVA, kVAr, pf).
Generator overload protection (kW).
Generator/load current monitoring and protection.
Configurable analogue/digital inputs.
Configurable DC, volt-free and staged loading outputs.
CAN, MPU and alternator speed sensing (selectable according to engine type).
Tier 4 CAN engine support.
Configurable event log (50).
DSE Configuration Suite configuration software PC software.
Fuel and start outputs (configurable over CAN).

Technical Specifications

DC Supply

Continuous Voltage Rating
8 V – 35 V continuous

Cranking Dropout Withstand
able to withstand: 0 V for 50 mS, whilst the supply is at least: 10 V before the dropout and the supply recovers to: 5 V. this is achieved without the need for an internal battery. LEDs and backlight will not be maintained
during cranking.

Maximum Operating Current
100 mA at 12 V, 105 mA at 24 V

Maximum Standby Current
60 mA at 12 V, 55 mA at 24 V

Maximum Sleep Current
40 mA at 12 V, 35 mA at 24 V

Generator and Mains

Voltage Range
15 V – 415 V AC (Ph – N)
26 V – 719 V AC (Ph – Ph)

Frequency Range
3.5 Hz – 75 Hz

Inputs

Digital Inputs A – F
Negative Switching

Analogue Inputs A – C
configurable as::
negative switching digital input
0 Ω – 480 Ω

Analogue Input D
configurable as::
negative switching digital input
0 V – 10 V
4 mA – 20 mA
0 Ω – 480 Ω

Outputs

Output (Fuel)
10 short term, 5 continuous,
at supply voltage

Output B (Start)
10 short term, 5 continuous,
at supply voltage

Auxiliary Outputs C, D, E and F
2 DC at supply voltage

Environmental Test Standards

Electromagnetic Compatibility
BS EN 61000-6-2
EMC Generic Immunity Standard for Industrial Environment.
BS EN 61000-6-4
EMC Generic Emission Standard for Industrial Environment.

Electrical Safety
BS EN 60950
Safety of Information Technology Equipment including Electrical Business Equipment.

Temperature
BS EN 60068-2-1
Ab/Ae cold test -30°C.
BS EN 60068-2-2
Bb/Be dry heat +70°C.

Vibration
BS EN 60068-2-6
ten sweeps in each of three major axes.
5 Hz – 8 Hz @ +/-7.5 mm, 8 Hz – 500 Hz @ 2 gn.

Humidity
BS EN 60068-2-30
Db damp heat cyclic 20/55° C @ 95% RH 48 hours.
BS EN 60068-2-78
Cab damp heat static 40° C @ 93% RH 48 hours.

Shock
BS EN 60068-2-27
three shocks in each of three major axes 15 gn 11 ms.

Degree of Protection Provided by Enclosures
BS EN 60529
IP65 - front of module when installed into control panel with optional sealing gasket.

DSE 6020 MKII

Hardware